<?xml version="1.0" encoding="UTF-8" ?>
<feed xmlns="http://www.w3.org/2005/Atom">
    <link href="https://neosid.de/en/hints-solutions/rfid-faqs/?sAtom=1" rel="self" type="application/atom+xml" />
    <author>
        <name>Neosid</name>
    </author>
    <title>Blog/Atom feed</title>
    <id>https://neosid.de/en/hints-solutions/rfid-faqs/?sRss=1</id>
    <updated>2026-04-26T03:16:05+02:00</updated>
    
        <entry>
            <title type="text">What do the designations of the NEOSID transponders mean, e.g. NeoTAG® Plug M...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-do-the-designations-of-the-neosid-transponders-mean-e.g.-neotag-plug-mfg10340</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-do-the-designations-of-the-neosid-transponders-mean-e.g.-neotag-plug-mfg10340"/>
            <summary type="html">
                <![CDATA[
                
                                            In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 Example:  NeoTAG® Plug MFG10340  
   
 &amp;nbsp; 
 
 
 
  NeoTAG ®   
 Registered trademark of NEOSID Pemetzrieder GmbH + Co. KG 
 
 
  Inlay  
 Components without housing 
 
 
  Plug  
 Component for press-in mounting in a drill hole 
 
 
  Flag  
 Component for fixing with fasteners, e.g. cable ties 
 
 
  SMD  
 Component for mounting on a printed circuit board 
 
 
  F  
 Component with ferrite core 
 
 
  M  
 Component for metallic environment 
 
 
  G  
 Bauteil mit Gehäuse 
 
 
  „10340“  
 Mechanical dimensions: diameter 10.3 mm, height 4.0 mm 
 
 
 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 1-0922  “  
                ]]>
            </content>

                            <updated>2017-07-15T01:00:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What do the individual NeoTAG® transponders weigh and what are their geometri...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-do-the-individual-neotag-transponders-weigh-and-what-are-their-geometric-dimensions</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-do-the-individual-neotag-transponders-weigh-and-what-are-their-geometric-dimensions"/>
            <summary type="html">
                <![CDATA[
                
                                            In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. 
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 
 
 
  NeoTAG® Inlay F/MF2626:  
 0.04 g/piece 
 max. dimensions: 2.6 x 2.6 x 2.6 mm 
 
 
  NeoTAG® Inlay F/MF2659:  
 0.08 g/piece 
 max. dimensions: 2.6 x 2.6 x 5.9 mm 
 
 
  NeoTAG® Plug G/MG3326:  
 0.03 g/piece 
 max. dimensions: Ø3.3 x 2.6 mm 
 
 
  NeoTAG® Plug FG/MFG4335:  
 0.09 g/piece 
 max. dimensions: Ø4.3 x 3.6 mm 
 
 
  NeoTAG® Plug FG/MFG8336:  
 0.20 g/piece 
 max. dimensions: Ø8.3 x 3.6 mm 
 
 
  NeoTAG® Plug FG/MFG10340:  
 0.36 g/piece 
 max. dimensions: Ø10.3 x 4.0 mm 
 
 
  NeoTAG® Flag FG5242:  
 0.26 g/piece 
 max. dimensions: 11.2 x 5.15 x 4.15 mm 
 
 
  NeoTAG® Flag FG7678:  
 0.43 g/piece 
 max. dimensions: 7.6 x 7.1 x 7.75 mm 
 
 
  NeoTAG® Plug FG4670:  
 0.18 g/piece 
 max. dimensions: Ø4.7 x 7.1 mm 
 
 
  NeoTAG® SMD FG4530:  
 0.09 g/piece 
 max. dimensions: 5.4 x 3.7 x 3.1 mm 
 
 
 
 &amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 1-0922  “  
                ]]>
            </content>

                            <updated>2017-07-15T00:30:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What reading ranges can be achieved with the NeoTAG® transponders?</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-reading-ranges-can-be-achieved-with-the-neotag-transponders</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-reading-ranges-can-be-achieved-with-the-neotag-transponders"/>
            <summary type="html">
                <![CDATA[
                
                                            Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
     Picture 1: Application example: Reading a NeoTAG® Plug MFG10340 using an NFC-enabled smartphone  
 &amp;nbsp; 
 All HF RFID transponder variants available in the NEOSID product portfolio in combination with the existing transponder environment (metal/non-metal) as well as the different readers and reader antennas that can be used result in a variety of different reading ranges. For this reason, we have compiled the following table with reference reading ranges to help you select a suitable transponder for your application: 
 
 
   Application    Metal *1     Non-Metal   
 
  Antenna  
 Loop *2  
 Stub *3  
 NFC *4  
 Loop *2  
 Stub *3  
 NFC *4  
 
 
  Reader  
 Industry *5  2 W 
 USB *6  200 mW 
 Mobile Device *7  
 Industry *5  2 W 
 USB *6  200 mW 
 Mobile Device *7  
 
   TAG version  
 &amp;nbsp;Reading distance  L  
 
 
  Inlay F2626  
   
   
   
 110 mm 
 8 mm 
 5 mm 
 
 
  Inlay MF2626  
 – 
 4 mm 
 – 
   
   
   
 
 
  Inlay F2659  
   
   
   
 210 mm 
 16 mm 
 25 mm 
 
 
  Inlay MF2659  
 45 mm 
 8 mm 
 6 mm 
   
   
   
 
 
  Plug G3326  
   
   
   
 80 mm 
 4 mm 
 3 mm 
 
 
  Plug MG3326  
 – 
 2 mm 
 – 
   
   
   
 
 
  Plug FG4335  
   
   
   
 100 mm 
 8 mm 
 5 mm 
 
 
  Plug MFG4335  
 110 mm *8  
 4 mm 
 – 
   
   
   
 
 
  Plug FG/MFG8336  
 50 mm 
 6 mm 
 5 mm 
 110 mm 
 8 mm 
 8 mm 
 
 
  Plug FG10340  
   
   
   
 140 mm 
 12 mm 
 22 mm 
 
 
  Plug MFG10340  
 90 mm 
 11 mm 
 18 mm 
   
   
   
 
 
  Plug FG4670  
   
   
   
 210 mm 
 16 mm 
 25 mm 
 
 
  Flag FG5242 *9   
 40 mm 
 7 mm 
 5 mm 
 110 mm 
 8 mm 
 8 mm 
 
 
  Flag FG7678 *9   
 190 mm 
 11 mm 
 12 mm 
 210 mm 
 16 mm 
 25 mm 
 
 
  SMD FG4530 *9   
 40 mm 
 7 mm 
 5 mm 
 110 mm 
 8 mm 
 8 mm 
 
 
 &amp;nbsp; 
 
 
   
 → there is a more suitable TAG for this application (Metal/Non-Metal) 
 
 
 – 
 → there is no reading range in this TAG/Reader combination 
 
 
 
 Important notes: 
   *1 : We test our reading range with RFID TAGs installed in stainless steel, X2CrNi12 (stainless steel according to EN 10088). The use of other materials may result in deviating reading ranges.    *2 : The loop antenna is a circular antenna made of coiled enamelled copper wire. Ø 125 mm    *3 : The stub antenna is a rod core Z1.2x12 with antenna winding.    *4 : The NFC antenna is the antenna built inside a mobile device. This varies depending on the device manufacturer and model.    *5 : We use the model ID ISC.LR1002-E from FEIG as „industrial reader“.    *6 : We use the model RFID-USB-READER4 from INDUSTRIA as „USB reader“.    *7 : We use the model EXPERIA XZ1(2018) from SONY as a mobile device with NFC function.    *8 : RFID TAG inserted into a metallic test piece with a through-hole and radial slot.    *9 :&amp;nbsp;  Measured on metal, stainless steel.  
 &amp;nbsp; 
 Reader/Reader antennas: 
 For our internal reading range tests, we use the following components, among others: 
     Picture 2: Loop antenna Ø 125 mm Self made       Picture 3: USB reader with stub antenne type RFID-USB-Reader 4 by INDUSTRIA         Picture 4: Mobiles device with NFC function  
 &amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T03:30:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What is the influence of the antenna alignment between RFID transponder and r...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-is-the-influence-of-the-antenna-alignment-between-rfid-transponder-and-reader</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-is-the-influence-of-the-antenna-alignment-between-rfid-transponder-and-reader"/>
            <summary type="html">
                <![CDATA[
                
                                            All NeoTAG® transponders use single-axis transponder antennas.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 All NeoTAG® transponders use single-axis transponder antennas. To achieve an optimal reading range, the magnetic fields of the reader antenna and the transponder antenna should be optimally aligned. The magnetic field generated in the reader antenna must produce an electrical voltage when flowing through the transponder antenna. In extreme cases, non-observance can lead to failure of the reading capability. 
     Picture 5: Components of a HF RFID transmission system  
 &amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T03:00:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">Which orientations are optimal for the respective NeoTAG® transponders?</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/which-orientations-are-optimal-for-the-respective-neotag-transponders</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/which-orientations-are-optimal-for-the-respective-neotag-transponders"/>
            <summary type="html">
                <![CDATA[
                
                                            Our various HF-RFID transponders are used in two different orientations...
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
  Our various HF-RFID transponders are used in two different orientations:  
 1. Rotationally symmetric transponder antenna orientation 
 In this orientation, the transponders are inserted vertically into an object to be tagged. To read the transponder, the reader antenna is usually brought to the front of the inserted transponder antenna. 
  Rotationally symmetrical transponder versions:  
 
 NeoTAG® Plug G/MG3326 
 NeoTAG® Plug FG/MFG4335 
 NeoTAG® Plug FG/MFG8336 
 NeoTAG® Plug FG4670 
 NeoTAG® Inlay F/MF2659 
 NeoTAG® Inlay F/MF2626 
 
     Picture 6: Rotationally symmetrical HF RFID transponders         Picture 7: Optimum reading transponder on  front side  
 &amp;nbsp; 
 2. 90° orientation of the transponder antenna 
 Especially when using mobile devices (smartphones, tablets, ...), it makes sense to offer a larger transponder antenna area.&amp;nbsp; As a rule, the device&#039;s internal reader antennas are designed for operation with a credit card. Transponder antennas that are too small thus produce very poor antenna coupling factors. As a solution, we have developed transponders with a 90° rotated antenna orientation for having good NFC reading capability with mobile devices. With these TAGs, the transponder inlays are inserted horizontally into the object to be marked. 
  Rotationally symmetrical transponder versions:  
 
 NeoTAG Plug FG/MFG10340 
 NeoTAG Flag FG7678 
 NeoTAG Plug FG4670 
 
 &amp;nbsp; 
     Picture 8: HF RFID transponders with 90° antenna alignment       Picture 9: NFC reading process with smartphone  
 &amp;nbsp; 
 This changed antenna alignment produces different reading ranges depending on the approach direction of the reading antenna to the transponder. These transponders therefore do not have a rotationally symmetrical transponder antenna and require an adapted alignment. 
     Picture 10: Reading range with different approach directions on NeoTAG® Plug FG/MFG10340  
 &amp;nbsp; 
 The internal transponder antenna is placed in the housing with 90° antenna alignment in parallel to the radio logo depicted on the top of the housing. 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T02:30:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What is the influence of the materials in which the NeoTAG® transponder is in...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-is-the-influence-of-the-materials-in-which-the-neotag-transponder-is-inserted</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-is-the-influence-of-the-materials-in-which-the-neotag-transponder-is-inserted"/>
            <summary type="html">
                <![CDATA[
                
                                            Environments other than air influence the inductance of the transponder antenna coil and thus the operating resonance frequency due to altered magnetic conductivity.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 Environments other than air influence the inductance of the transponder antenna coil and thus the operating resonance frequency due to altered magnetic conductivity. With plastics or other non-ferromagnetic materials, this is generally not critical.&amp;nbsp;&amp;nbsp; 
 In a metallic environment, the field strength in the direction of the reading antenna is reduced from 100 % to approx. 20 %! This influence is shown quite well in the following simulation pictures: 
     Picture 11: Magnetic field strength of NeoTAG® in air  
   
     Picture 12: Magnetic field strength of NeoTAG® in metal  
 &amp;nbsp; 
 Metallic environments influence the operating resonance frequency differently depending on the material or alloy. 
 &amp;nbsp; 
     Picture 13: Effect of metallic environments to the resonance frequency of the transponder  
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T01:30:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">How do the NeoTAG® transponders behave in certain metallic environments?</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/how-do-the-neotag-transponders-behave-in-certain-metallic-environments</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/how-do-the-neotag-transponders-behave-in-certain-metallic-environments"/>
            <summary type="html">
                <![CDATA[
                
                                            For common industrial metals and alloys, we have determined the influence to the resonance frequency of the transponder by laboratory tests...
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 For common industrial metals and alloys, we have determined the influence to the resonance frequency of the transponder by laboratory tests: 
 
 
  Material  Chemical symbol/formula  Pre-tuning of Resonance frequency  f  RES   Resonance frequency&amp;nbsp; f  RES  before installation  Operating frequency  f  B   
 
 Aluminium 
 Al 
 -2.0 MHz 
 11.6 MHz 
 13.60 MHz 
 
 
 Iron 
 Fe 
 -1.0 MHz 
 12.6 MHz 
 13.60 MHz 
 
 
 Brassg 
 CuZn 
 -1.5 MHz 
 12.1 MHz 
 13.60 MHz 
 
 
 Stainless steel *1  
 e.g. X2CrNi12 
 -600 kHz 
 13.1 MHz 
 13.60 MHz 
 
 
 
  Table 1: Frequency behaviour in different metallic environments  
  *1 Our NeoTAG® HF RFID transponders are pre-tuned for use in stainless steel! 
 &amp;nbsp; 
 Due to the broadband design of the transponder and usually also of the reader antennas used, different environmental materials lead in practice to slight deviations in the reading range. In order to achieve an optimal reading range, measurements of the frequency tuning should be carried out in the target application. The resulting application-specific pre-tuning of the transponder will lead to the optimum operating resonance frequency in the application.&amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T01:00:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What should be considered when affecting reader antennas?</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-should-be-considered-when-affecting-reader-antennas</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-should-be-considered-when-affecting-reader-antennas"/>
            <summary type="html">
                <![CDATA[
                
                                            Metallic objects not only influence the electromagnetic behaviour of the TAG...
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 Metallic objects not only influence the electromagnetic behaviour of the TAG, but can also affect the reader&#039;s antenna. Any interference must be excluded or taken into account accordingly during range measurements. 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T00:30:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">Can a loop antenna be enlarged as a reader as desired and does this also incr...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/can-a-loop-antenna-be-enlarged-as-a-reader-as-desired-and-does-this-also-increase-the-reading-range</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/can-a-loop-antenna-be-enlarged-as-a-reader-as-desired-and-does-this-also-increase-the-reading-range"/>
            <summary type="html">
                <![CDATA[
                
                                            In combination with a loop antenna, the above-mentioned reading ranges are obtained.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 In combination with a loop antenna, the above-mentioned reading ranges are obtained. Investigations have shown that the optimum size of the loop antenna is 125 mm in diameter and that further enlargements do not increase the reading range any further. Loop antennas with smaller diameters achieve smaller reading ranges. Due to their size, loop antennas are generally not used in industrial applications. 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T00:15:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">How long does it typically take to read HF RFID transponders? What energy is ...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/how-long-does-it-typically-take-to-read-hf-rfid-transponders-what-energy-is-required-by-the-reader</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/how-long-does-it-typically-take-to-read-hf-rfid-transponders-what-energy-is-required-by-the-reader"/>
            <summary type="html">
                <![CDATA[
                
                                            The time required to read the UID (8 bytes = 64 bits) from the transponder&#039;s memory is approx. 10 ms. Reading out other memory areas and quantities leads to longer reading times.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
 The time required to read the UID (8 bytes = 64 bits) from the transponder&#039;s memory is approx. 10 ms. Reading out other memory areas and quantities leads to longer reading times. Programming/writing the transponder requires more energy in the transponder. This may result in different working ranges than during the reading process. 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 2-0922  “  
                ]]>
            </content>

                            <updated>2017-07-14T00:00:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">What size should a drill hole be for the different NeoTAG® inlay and plug var...</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/what-size-should-a-drill-hole-be-for-the-different-neotag-inlay-and-plug-variants</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/what-size-should-a-drill-hole-be-for-the-different-neotag-inlay-and-plug-variants"/>
            <summary type="html">
                <![CDATA[
                
                                            In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used.
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
   
 
 The transponder types  Inlay  and  Plug  are inserted into cavities in objects. These cavities are made before marking the objects, e.g. by means of mechanical processing such as drilling or milling. 
  The following drill hole dimensions are recommended for the corresponding transponders:  
 
 
 
  Transponder version  Application  Drill hole-Ø / mm  Drill hole depth/mm  
 
 NeoTAG ®  Inlay F2626 
 Non-Metal 
 min. Ø 2.7 
 min. 2.7 
 
 
 NeoTAG ®  Inlay MF2626 
 Metal 
 min. Ø 3.5 
 min. 2.7 
 
 
 NeoTAG ®  Inlay F2659 
 Non-Metal 
 min. Ø 2.7 
 min. 6.2 
 
 
 NeoTAG ®  Inlay MF2659 
 Metal 
 min. Ø 10.0 
 min. 6.2 
 
 
 NeoTAG ®  Plug G/MG3326 
 Non-Metal Metal 
 Ø 3.0 ± 0.05 
 min. 2.7 
 
 
 NeoTAG ®  Plug FG/MFG4335 
 Non-Metal Metal 
 Ø 4.0 ± 0.05 
 min. 3.7 
 
 
 NeoTAG ®  Plug FG/MFG8336 
 Non-Metal Metal 
 Ø 8.0 ± 0.05 
 min. 3.7 
 
 
 NeoTAG ®  Plug FG/MFG10340 
 Non-Metal Metal 
 Ø 10.0 ± 0.05 
 min. 4.1 
 
 
 NeoTAG ®  Plug FG4670 
 Non-Metal 
 Ø 4.3 ± 0.05 
 min. 7.1 
 
 
 
 &amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 3-0922  “  
                ]]>
            </content>

                            <updated>2017-07-13T03:00:00+02:00</updated>
                    </entry>

    
    
        <entry>
            <title type="text">How do I mount the NeoTAG plug transponder in an object?</title>
            <id>https://neosid.de/en/hints-solutions/rfid-faqs/how-do-i-mount-the-neotag-plug-transponder-in-an-object</id>
            <link href="https://neosid.de/en/hints-solutions/rfid-faqs/how-do-i-mount-the-neotag-plug-transponder-in-an-object"/>
            <summary type="html">
                <![CDATA[
                
                                            The NeoTAG® Plug transponders are inserted into a suitable cavity, e.g. a drilled hole, in the object to be marked. The following installation procedure is recommended...
                                        ]]>
            </summary>
            <content type="html">
                <![CDATA[
                 
 Our product range of NeoTAG® HF RFID transponders/ RFID chips is constantly being expanded and new transponder versions are regularly added. In connection with the use of our transponders, we have compiled a large amount of background information on mounting, function, design, operating behaviour, etc. due to the many applications in which the products are used. As a supplement to our  Product Information HF RFID Transponder  data sheet, this article contains further technical explanations and application-supporting information. 
 
 &amp;nbsp; 
  The NeoTAG® Plug transponders are inserted into a suitable cavity, e.g. a drilled hole, in the object to be marked. The following installation procedure is recommended:  
 
 
 1 
 
 Create a drilled hole/blind hole with the dimensions specified for the respective transponder type. These can be found in the previous section of this Technical Recommendation. Please take into account the tolerances mentioned in order to ensure optimum press-fit fastening of the plug transponder in the hole. 
 
 
 
 2 
 
 Make sure that the mounting hole is free of any residue. Dust, drilling chips and grease reduce the fixing force of the press-fit mounting for the transponder in the drill hole. We recommend cleaning, degreasing and drying the drill hole. 
 
 &amp;nbsp; 
 
 
 3 
 
  
 Insert the NeoTAG® Plug Transponder into the drilled hole in a centred position. This can be done in a manual process or automated with suitable fixtures.&amp;nbsp; 
 &amp;nbsp; 
 
 
 4 
 
  
 Press the NeoTAG® Plug transponder vertically into the drilled hole using a suitable tool. Use e.g. a punch tool with a flat front. Make sure that the press-in tool completely covers the transponder surface. This ensures flush insertion. Punctual mechanical stress of the transponder can lead to damage! The  recommended force  for pressing the transponder into the hole  is  F  = 40 N . Avoid press-in forces above 300 Newton (the maximum permissible forces can be found under point 7 of this document). Higher forces can damage the transponder.&amp;nbsp; 
 &amp;nbsp; 
 
 
 5 
 
  
 Check the function of the NeoTAG® Plug transponder with a suitable RFID reader.&amp;nbsp; 
 &amp;nbsp; 
 &amp;nbsp; 
 Tell us your requirements - we will develop the right solution for you. 
 Have we aroused your interest? Then  contact us  about RFID transponders for different frequency ranges. Customised solutions are our speciality. We will be happy to support you with our know-how to realise your product development.&amp;nbsp; 
 &amp;nbsp; 
 Download 
 PDF:&amp;nbsp; „  Technical Information NeoTag 3-0922  “  
                ]]>
            </content>

                            <updated>2017-07-13T02:30:00+02:00</updated>
                    </entry>

    
</feed>
